Are you tired of looking at the dull and boring woodwork of your home? Well, it is time to remodel and renovate your place with interesting DIY ideas that will freshen up the look of your house and provide a lively atmosphere for your family.
For that purpose, you need to have an efficient power tool that will perform your cutting task seamlessly. Unfortunately, in such a saturated market of power tools, it often gets quite challenging to find the perfect pick for your work requirements.
In this reading guide, we have provided you with the best Craftsman circular saw review. You can find great circular saw at an affordable price at Craftsman. They have the perfect tools for any project you are working on.
Whether it is a small DIY job or something larger, they have what it takes in their line of products and can satisfy all your needs with ease.
Top Picks of Craftsman Circular Saws; A Thorough Review
1. Craftsman CT2000 Circular Saw (19.2 Volt)
2. Craftsman CMES500 Circular Saw (13-Amp)
3. Craftsman Cordless CMCS500B Circular Saw (20 Volt)
1: Craftsman CT2000 Circular Saw (19.2 Volt) Review
The 19.2 Volt Craftsman circular saw is the best choice for all your pesky cutting projects. The Craftsman 5 ¼ inch cordless circular saw is an excellent choice for those looking to get maximum portability.
This small but powerful device can cut through 1 ¼” material at 90 degrees and even slice through 1-1/16″ wood with ease.
2: Craftsman CMES500 Circular Saw (13-Amp) Review
The Craftsman 13 amp, seven ¼ inch circular saw has power and precision for all your cutting needs. With a 5300 RPM motor that can cut through a material as thick as 2.5 inches on the 90-degree angle or 1 3/4″ at 45 degrees beveled edge – this blade will do a swift performance for any project.
This Craftsman saw is perfect for cutting cardboard boxes, vinyl siding, and interior trim. This powerful tool has a built-in spindle lock mechanism that makes changing blades easy. Moreover, its lightweight design reduces fatigue, so you can get the job done quickly without sacrificing accuracy.
Craftsman Cordless CMCS500B Circular Saw (20 Volt) Review
The Craftsman V20 Cordless Circular Saw is a step up in performance from the 5 ½ inches saw. It has an impressive maximum cutting depth of 2 1/8 inches, and bevel cut depths at 45 degrees that can go as deep as 1 ½”.
The motor operates 4,000 RPM while its lithium ion battery provides enough power for all your projects without having to worry about recharging or cords getting tangled. The cordless circular saw is the perfect tool for cutting through any material, whether logs or drywall.
This powerful machine has a 4200 RPM motor that can make aggressive cuts while still bringing up 50 degrees of angles with its pivoting beveling shoe. In addition, the lightweight design means less arm strain so that you will have no problem handling this tough equipment.
This Craftsman cordless circular saw review would help you to choose a saw wisely. This is the best pick in every aspect, and it has the potential to make your upcoming cutting projects like a walk in the park.
Safety Measures of Using a Circular Saw
A circular saw is a power tool that should be in everyone’s tool arsenal, but it also has one of the highest dangerous accident rates. Here are some tips for using this versatile machine safely:
- Make sure always to wear suitable eye protection, a respirator, or dust mask, and keep your hands away from the blade. If possible, connect it with power tool extractors.
- It is essential to keep your hands clear of the saw kerfs when using this tool. Also, make sure there is no obstruction in front and behind you; otherwise, it can cause injury.
- Choose the correct and sharp blade to perform your cutting tasks efficiently.
- When using a circular saw, always make sure to let the blade stop before lifting it from your workpiece.
Techniques to Use a Circular Saw
The following valuable techniques will assist you in safely using a circular saw for any work requirement:
Set the Blade Dept:
It is important to set the blade depth correctly. When the blade is adjusted correctly, the saw is more likely to work efficiently and swiftly. In addition, it is easy to determine the depth of your blade.
To do so, remove power from the saw and hold it alongside the board with the guard retracted at 1/4″ – 1/2″. Next, loosen the adjustment lever or knob until the blade extends below the surface by about an inch; then tighten for a perfect cut every time.
Support the Board
To make an accurate cut at the end of your board, always ensure that it is free to fall or move away. Letting go can result in splinters, so be careful and support the board continuously but do not clamp anything as this could cause damage.
Technique of Cutting Plywood
Crosscutting plywood without supporting it across its entire length can cause the saw to bind or tear as you cut. If using sawhorses, span them with two 2x4s placed side by side, so they provide extra support for your workpiece.
It helps prevent any sudden slips that might happen when cutting crooked boards.
Cutting an angle is easier with a blade guard that retracts. You can prevent the saw from binding or wandering by first pulling back on it as you make your cut, then slowly releasing once you have started cutting at about 4-6 inches in depth
The newer designs of saws come equipped with this safety feature. However, there is no need to worry if yours does not because you can find other ways to safely make angled cuts using power tools like circular saws, etc.
The Final Word:
Choosing the right circular saw for your DIY projects and cutting tasks can be quite daunting. To pick the best one, you need to go through all the specifications and key features to find the suitable one that goes in line with your work requirements.
In this Craftsman circular saw review, we have meticulously presented the specifications and dynamic work performance of three of the best models of Craftsman. They are the reliable ones and will make your working experience seamless and enjoyable.
Do not go for the fancy buzzwords of different brands. If you want your project to be done smoothly, then Craftsman circular saws are for you.
Q: What do you need to know about circular saw?
Circular saws are power tools that are manufactured to pierce through wood and other stocks. Their blades move at all angles to cut through any material with precision and accuracy.
Q: How does a circular saw work?
A circular saw is an electric tool that can cut many different materials with the help of various blades. They come in three styles: crosscut, rip or plunge; each doing what they do best depending on how it is set up.
Q: Can a circular saw cut concrete?
Yes, a powered circular saw has the potential to cut through concrete and tiles.
Q: Does a circular saw need to be oiled?
The circular saws are the most common tools that professionals and amateurs alike own. Most circular saws do not need to be lubricated because that is already done in the manufacturing process.