Fridayrack is reader-supported. When you buy through links on our site, we may earn an affiliate commission with no extra cost to you.

Drills Power Tools Tips & Tricks

Which Power tool is More Reliable, Drill vs Hammer Drill?9 min read

December 29, 2021 6 min read
Reading Time: 6 minutes

We have brought you this detailed write-up to clear the confusion regarding Drill vs Hammer Drill as we all know that both these power tools are used at construction sites. However, though the names are similar, the functionalities are different.

It is not an ordinary topic as the global market share of these machines has been valued at $16.54 Billion in the past few years and is expected to reach $28.76 Billion by 2025.

🔹 When we drill in concrete and break large blocks, we use the hammer drill.

🔹 On the other hand, the simple drill machine creates circular holes in wood and concrete. Its circular motion can also help in screw driving and similar functions.

If you’re purchasing a corded or cordless drill for the first time, you might have found there are an extensive range of devices on the marketplace. However, your primary consideration will be the functionality. So, first, you will have to decide what purpose you need it.

If you are still undecided or unsure what hammer drills are for; our guide will for sure assist you out! Continue reading to learn more about the difference between hammer drill and drill.

What are the Main Similarities Regarding Drill vs Hammer Drill?

However, the differentiation is not as simple as it sounds. There are a lot of aspects and subtypes of both these tools involved. Therefore, one will have to check all the essential aspects for a detailed overview with great care. That is why we would discuss it systematically as follows.

Of course, these are not altogether different or similar to each other. That is why some beginners might confuse them at the start. The best way is to check the similarities first. These, too, depend upon several features. Before we proceed, let us highlight a few:

✔️ Both are used in the same scenario, for instance, repair work or new construction.

✔️ These are like most of the power tools maintenance-free unless some significant fault.

✔️ They need electric power to run.

✔️ Both are handheld and specially designed for that purpose with ergonomic handles.

Now, let us talk in detail about the common differences and similarities regarding Drill vs Hammer Drill.

What Is a Drill Used for and How?

A basic drill can take numerous forms, whether run by electrical power or compressed air. However, basically in all cases, it provides a consisting rotary motion. It also allows functioning with other tools like screwdrivers. You can also mount a wire wheel on it.

Due to the above reasons, a drill is more than prevalent in masonry. In other words, these are not just restricted or limited to drilling holes in various surfaces. All that makes it an efficient and handy tool. Even hammer drill vs driver-drill come under that classification.

Moreover, these come in a vast range of varieties. Various types with variable speeds and power are used for different projects and scenarios. So, if you are just required to drill and drive screws for woodwork or metalwork, it is the best choice.

A smaller-sized, lighter (and probably cheaper) drill may be ideal even if you want to operate in limited or congested areas. In addition, it can also be battery-powered where you do not have electric power.

However, if you want an all-around drill for basic DIY, or you need to drill into solid walls, then it’s probably worth buying some kind of hammer drill.

Read More: Electric Screwdriver vs Drill

What is a Hammer Drill and What are Its Basic Uses

A basic hammer drill uses a rotary action supplemented by a series of quick and hard impacts. These powerful impacts are in both directions, for instance, forth and back. Due to these impacts, it can crush large pieces of concrete.

It makes a loud noise and a throbbing sound that might disturb the surroundings. For example, if used in a residential area, one might hear loud rasping drilling sounds traveling through the walls of surrounding rooms or structures.

This additional force enables a masonry hammer drill to make its way through challenging surfaces. These are also furnished with various Hammer modes for heavy-duty tasks. But that does not mean hammer drills are just suitable for bricks and masonry.

In some modern tools, the hammer action can be turned off, whereby the machine will work like a basic rotary drill for drilling into softer surfaces.

Basic Terminologies and Definitions one Must be Clear About

The best way to get an idea regarding the similarities of two tools or objects is to know about the basic terminologies. But, unfortunately, that is the thing that often creates confusion. For

instance, someone at the construction site may ask you about the functions or characteristics.

If you require to drill into masonry, you’ll wish to consider some hammer drill. But the primary term used will be to drill through the floor or roofing etc. In the same way, you need easy rotary action to drive a drill or any other device that will fit in its chuck.

Differences in Functionality

The same stands true for the materials used by these two tools. Though you might have some difficulty with a manual hand drill, most of these makers can be utilized to make holes in metal, wood, ceramics and plastics without too much difficulty.

Similarly, there are a couple of materials for hammer drills that they will find much more difficult to permeate. Particularly incredibly tough building portions like bricks, stones and concrete. All these come under the compound term of “masonry.”

It must be clear that as the essential field of action is the same, one can often be confused regarding the primary usage. To clear it further, let us define and explain the functionalities of both these power tools in a comparative way.

Credit: Out of the Woodwork Youtube

Variable Performance and Efficiency Level

The primary distinction between both these tools depends on their performance. They have various efficiency levels in this regard.

For instance, you can use the drill as a screwdriver with some amendments for tightening and losing different screws.

On the other hand, we have a hammer drill. Now, most of these power tools are utilized to make holes and drill various surface areas. So, the performance difference is the primary distinction when discussing the difference between drill and hammer drills.

Price Variations in Drill vs Brushless Hammer Drill in Market

The price is another main factor in choosing between these two tools. MIt is because the price is an essential purchasing factor for numerous.


Things are pretty clear here; you will have to pay more to buy a hammer drill.


The price is another main factor in choosing between these two tools. This is because the price is an essential purchasing factor for numerous. Things are pretty clear here; you will have to pay more if you want to buy a hammer drill.

It is since hammer drills are not cheap. So, you have to invest a bit to get one of your choices. But, if we talk about the drills, they are comparatively low-cost. So, you can acquire it even without a prior budget plan low-cost. So, you can acquire it even without a prior budget plan.

Additionally, if we speak about hammer drills, the scene changes. These are not only pricey but also difficult to select. You will have to choose a vendor quite carefully. It must be checked well concerning specs and functionalities. The same stands true for hammer drill vs regular drill.

Conclusion:

The power tools like drill and hammer drill can often be confused due to their names. Though the word “drill” is similar, their functionalities are different. For example, a drill is used to put holes while a hammer drill breaks large concrete portions.

The best way to buy any of the above tools is to study the Drill vs Hammer Drill information. Once you are clear about the difference, it will not be a big deal to decide.

Frequently Asked Questions

Though the above information is enough to give you a clear idea regarding these two tools, here are some most popular questions answered for your convenience.

Q.1. For which purpose is a drill machine used?

Ans: The normal function of a drill machine is to put holes in walls and wood. It can also be used for other purposes such as screw driving etc.

Q.2. What are the primary uses of a Hammer Drill?

Ans: It is usually used to break and smash larger concrete blocks. It can also be used in building demolition ventures. Usually, its functions are in the masonry field.

Q.3. Do all the drills and hammer drills function the same?

Ans: No, that is not the case; both of these tools function differently. Though the mechanism might be the same at some places, the results and outputs are different.

Leave a comment

Your email address will not be published. Required fields are marked *